Shymkent

Ismailova St. 15b

+7 700 400 5817

Call from 9:00-22:00

+7 775 499 9933

Call from 9:00-22:00

[email protected]

For applications and offers

Mon - Fri: 9:00 - 18:00
Sat: 9:00 - 13:00

Work schedule

SHYMKENT

Ismailova St. 15 b

+7 700 400 5817

+7 775 499 99 33

+7 775 401 56 69

Call from 9:00-22:00
Guarantees of product supply
Throughout the entire existence of the company, there have been no refusals to fulfill their obligations to customers, and the deadlines set by the client have been strictly observed.
More detailed
A wide range of products
The Sheber Yug company has a large selection of metal products.
More detailed
Supplies of rolled metal products in any volume
We have established ourselves as a reliable partner and a trusted supplier.
More detailed
Production and supply of pipes
We produce various pipes. We supply various pipes throughout Kazakhstan
More detailed

Reliability and warranty

Our products are the best in terms of durability and reliability.

Range and
price

Our online store has a wide range of different building materials at affordable prices.

Honesty and openness to cooperation

We look forward to long-term cooperation, so we deliver goods without defects and without unreliable fragments.

Catalog

Profile pipes

Профильные трубы

Metal Sheet

Стальные листы kkлk

Metal pipes

Стальные трубыллллл

Steel corner

Уголок стальной

Fittings

Арматура

Channels

металлопрокат в Шымкенте
Швеллеры

Square

Квадрат

Circles

Круги

Paints

Краски
The entire catalog

Our main task is

To provide the buyer with the best paints, metal products, cutting discs, fittings

We sell products such as: Rebars, beams, wire rods, squares, circles, pipes, corners, channels and wire, paints, rolled metal, cutting discs

Learn more about us

Our services

Production of welded profile — round pipes

The manufacturing process of round pipes. For this, it is necessary to have specialized equipment and knowledge in the field of metalworking.

Price: 40,000 tenge/ton

Longitudinal
cutting of sheet metal

The process of dividing sheet metal into strips or strips with longitudinal edges. This process can be performed using specialized equipment.

Price: 10,000 tenge/ton

Proper wire rod drawing of 6-8-10mm and 4-5mm wire

Wire extraction on the specialized equipment of our organization

Price: 10,000 tenge/ton

Current information

Download the price list

Download the price list with current prices

Download the price list

Classification of fittings

Reinforcement class

The construction industry is huge, but the rebar industry in Shymkent is much larger. It’s easy to get confused, even for a professional. A large number of tasks require a large number of materials of different structure and purpose, and construction fittings are no exception.
The valve classification was invented just for the sake of possible simplification and unification of processes.

The rebar class or rebar steel class is a special designation, the so–called marking, indicating the maximum strength of the rod, its permissible dimensions, the definition of tasks, etc.

Параметры

Ориентироваться во всем том разнообразии, которое нам предлагает строительная арматура в Шымкенте, позволяет таблица арматурных классов.

Таблица эта очень проста, и содержит в себе несколько колонок. В первой маркировка, а дальше указываются ее параметры:

  • вес;
    предельные
  • диаметры;
  • выдерживаемые нагрузки и сопротивление;
  • возможность или невозможность встраивать ее состав напряженных железобетонных конструкций и т.д;
  • относительное удлинение;
    длина стержня.

Ecowool

Ecovata is a new generation cellulose insulation, the latest insulation products on the market. The specificity of the Eco-chamber in Shymkent lies in a qualitatively different production concept, which makes it possible to increase product requirements.Material consumption decreases, and the figures for consumption in open floors are most indicative: 30-32 kg/m3 versus 35-38 kg/m3 of “conventional” cellulose insulation. The difference is

Metal products

Высотное здание, построенное только при использовании одних только связующих средств и примитивных строительных материалов, долго не простоит. На него влияют различные погодные факторы и время. Сила притяжения тянет его вниз, человеческий фактор вносит свои коррективы в его существование (неразумное обращение с несущими стенами может быть фатальным, например), и непрочная конструкция может развалиться при малейшем сотрясении, проседании почвы, всаженного в неправильное место гвоздя, слишком сильного дождя или ветра.

Rolled metal products are indispensable in construction – the so-called steel and cast iron products used in a wide variety of fields. It is used to make a frame mesh of reinforced concrete – reinforcement, which is welded to each other, which gives the building greater strength. They make pipes out of it – water and gas pipelines, without which the residents would be deprived of the most necessary things, and life in the house would become unthinkable. It is used to make corners used in the construction of high-rise buildings, protecting them from collapse. Rolled metal is indispensable in construction. But it has other uses, because there are three types of rolled metal: black, colored and white, and each of them is used in its own field.

Paints

Paints are one of the most popular finishing materials. Enamel is the most sought—after of its “competitors”. Its popularity is due to its ease of use and pleasant appearance after finishing the work — a beautiful glossy surface is obtained, in addition, the cost of this material is quite low. In order for a surface finished in this way to last as long as possible, it is necessary to choose the right paint.

Catalog of Paints

Cutting discs

Cutting discs are consumables used for cutting steel, cast iron, wire, and other materials. There are several thousand varieties of cutting wheels on the market for home use and industry.

 There are quite a few varieties of these discs.:

various companies;
different cost categories;
for different materials.

Metal cutting discs – these discs are used for cutting and facing metal products.

Fittings

Rebar is a special product that is directly related to rolled metal. It is used to strengthen a variety of reinforced concrete structures. The very first practical use of fittings dates back to the time period when the first water supply systems had just appeared and began to develop. Today, due to the rapid growth of the need for the use of valves in the industrial and construction sectors, the production of this type of product is increasingly developing. And this is a really positive moment.

Modern fittings are made of steel rods, which have a circular cross-section and a special grooved surface. This valve is called A500C or A-lll. Today, it is quite widely used in the construction of various structures and buildings, both residential and public, industrial and others. 

There is also a smooth reinforcement that does not have fluting on the surface. It is designated A-l or A240C. These are smooth bars made of carbon steel. As a rule, it is used in small quantities in the construction or production of precast concrete products.

Price lists

Price lists

[dflip id="1856"][/dflip]
Download the price list

Get in touch with us quickly

Leave your request

We will help you with your question.

Submit your application

Our clients

Product catalog
Paints
Fittings
Cutting discs
Metal products

Call from 9:00-22:00

+7 7252 56 17 49
+7 775 499 99 33

Work
schedule

Mon - Fri: 9:00-18:00
Sat: 9: 00-13: 00

Shymkent

Ismailova St. 15 b

[email protected]

For suggestions and applications

Made in Alteman

Submit your application

Whatsapp